Have you ever wondered if your window film could be taken off? It is a common challenge that our clients often face. Read our blog to gain more insights!
Commercial window Film has several uses. It enhances the appearance of building windows. However, if it is too worn down or severely scraped, it could strain the eye and fail to serve its purpose.
As a result, buildings and homeowners should learn how to remove outdated window tints effectively.
For various reasons, owners of commercial buildings use window tints in their buildings. Window films enhance their aesthetic value while enhancing privacy and UV protection.
The installation's quality, the weather, and the product's quality all affect its longevity. Due to wear and tear of window films, the window's appearance depreciates with time. In this case, it needs to be taken out and replaced.
What Is Window Tinting?
Window tinting is a common practice for various kinds of commercial structures. It not only keeps the workplace comfortable for the staff but also offers your business the polished appearance it needs. But what precisely is window tinting? Installing commercial window films can protect you from UV rays, prevent windows from heating up, and give them a tint that goes with your branding. However, there are so many benefits to window tinting that we must go into further detail.
3 Signs Your Commercial Window Tint Needs An Upgrade
1. Aesthetics
Sometimes an upgrade is necessary. Your window film might not be broken, but it may need to be replaced because it looks old. However, because the glue will still be present and much more challenging to get rid of, this may be the circumstance where removal is the most difficult.
2. Discoloration Of Window Tint
Window tint will eventually turn into an unattractive purplish tone due to the dyes in the window film breaking down. Discoloration also indicates that the film has lost its ability to block UV rays, so a more recent, efficient window film should be used.
3. Bubbles In The Window Films
Failure of the glue and shoddy installation techniques lead to bubbling. Many people will attempt to remove and reapply the area that has bubbled, but doing so could exacerbate the problem. Unfortunately, a bubbled film must be replaced entirely.
How To Remove Old Commercial Window Films
There are numerous methods available for removing outdated commercial window tint, which you can try yourself or have a professional crew do for you. Window tint removal involves removing the adhesive and the film itself.
Peeling the film off should be simple if done correctly. If done incorrectly, you could leave tiny particles of film on the window that you would have to spend a lot of time peeling and scraping off.
You must carefully clean the window after removing the film and adhesive before putting in a new film. Any leftover adhesive or debris might result in bubbles and other problems.
The principal removal technique involves heating the window film adhesive to degrade it, allowing the leftover tint to be peeled off. Heat additional glue regions to loosen it up as it flakes, starting at the corner of the glass. This technique is frequently regarded as the simplest way to remove commercial window tint, and you can use a variety of instruments to complete it.
- Steamers
Window tints can be removed with a steamer, which is frequently regarded as one of the quickest and simplest methods. If you don't already have one, you can rent one. Use the steamer on the window's interior and exterior to soften and remove the film. It will make it easier to remove the film and glue simultaneously.
- Heat Guns
How to use a heat gun to remove window tint? The heat gun should be used similarly to a steamer inside and outside the glass to dissolve the adhesive.
After completing this, you should be able to remove the film and use the equipment listed below to scrape away any glue that is still there.
How To Remove Glass Adhesive From Commercial Window Films
- Solvents
After removing the film with one of the techniques mentioned above, you can use a solvent to remove the glue holding the window tint. The glue can be broken down using acetone, isopropyl alcohol, or a commercial window film adhesive remover and then wiped or scraped off.
- Sprays
To get rid of the glue residue, you can also use a spray that has been specially designed to remove window tints. You can get these at places that provide vehicle or home improvement supplies.
- Scraping
When you're down to your final few pieces of adhesive, you might be tempted to slash your window with a razor blade or another sharp item, but proceed cautiously. If you are not careful, you are likely to scratch the window. When a window is scratched, the only option is to replace it.
- Window Tint Removal In Cold Weather
Removing window tints in cold weather can be more complex because the primary method needs heat. In colder weather, keeping the glue flexible could be more challenging, but as long as you take your time and maintain the heat source close to the edge you're peeling off, you should be alright.
Leave It To The Professionals
Removing window tint may prove to be difficult for many building owners. As a result, most of them choose to use the services of qualified tint removers.
We strongly advise hiring a crew for expert installation because the installation significantly impacts the durability of your window tint. All of your demands for commercial window tint removal can be met by Tint By Masters. Our experts are capable of describing the procedure for removing commercial window films. We are a trustworthy window film installation company that consistently works to give top-notch related solutions for your commercial space.
Are you curious to know more about the goods and installation services offered by Tint By Masters? You can reach us by phone at +1 (407) 521-0920 and get a free quotation.